fitacfclientgui

Syntax

fitacfclientgui --help
fitacfclientgui host port

Synopsis

Graphical client program for fitacf TCP/IP data streams.

Options

`--help`	print the help message and exit.
`--version`	print the RST version number and exit.
`-nrange nrng`	set the maximum number of range gates to display to nrng (default is 75).
`-r`	show slant range (km) instead of range gate number.
`-gs`	color ground scatter white (velocity only).
`-p`	plot power.
`-v`	plot velocity.
`-w`	plot spectral width.
`-e`	plot elevation angle.
`-pmin pmin`	set the minimum value of the power scale to pmin.
`-pmax pmax`	set the maximum value of the power scale to pmax.
`-vmin vmin`	set the minimum value of the velocity scale to vmin.
`-vmax vmax`	set the maximum value of the velocity scale to vmax.
`-wmin wmin`	set the minimum value of the spectral width scale to wmin.
`-wmax wmax`	set the maximum value of the spectral width scale to wmax.
`-emin emin`	set the minimum value of the elevation angle scale to emin.
`-emax emax`	set the maximum value of the elevation angle scale to emax.
`host`	hostname or IP address of the system to connect to.
`port`	port number to connect to on the system.

Description

Graphical client program for fitacf TCP/IP data streams.

The program dumps an ASCII representation of the fitacf data stream to standard output. When color mode is enabled, users can toggle between power, velocity, spectral width, and elevation angle by pressing 'p', 'v', w', or 'e', respectively. The 'g' key toggles the ground scatter flag, while the up/down arrow keys adjust the color scale maximum and right/left arrow keys cycle through parameters. Press any other key to exit the program.

Examples

fitacfclientgui peanut.jhuapl.edu 1024

Connect to the host peanut.jhuapl.edu at port 1024 and display the data stream.